Tesla Smart Indoor Irrigation System Benutzerhandbuch Seite 5

FUNCTIONS
1. Manual watering
Your pump has the ability to allow you to manually water without
disturbing the programmed schedule. Manual mode is used
to test the device after assembly or to run an extra watering
cycle outside the program. Press the control button (2) once to
active manual watering. The green indicator will light up. Default
runtime is 30 seconds.
You can set the length of the manual watering cycle in app. De-
fault runtime is 30 seconds. The maximum runtime up to 4 min
59 s (5 minutes). Go to device home screen > tap
"Work time"and select desired cycle length. The maximum
manual mode runtime is 4 min 59 s (5 minutes).
You can stop the flow of water at any time, whether it is during
manual watering, or during a programmed time. Press the control
button (2) or tap the watering icon in app to stop watering.
2. Normal Timing
Normal timing plan lets you water for a particular period in a
day. With this mode, you can set several different watering plans
every day. Each watering plan can be set with different start time,
duration and watering day (frequency).
3. Cycle Timing
Cycle timing lets you set watering for a certain period during
given time in a day. For example you can set the kit to water for
one minute every 5 minutes from 14:00 to 15:00. This mode can
be used for water demanding plants od during very hot days. This
mode helps to soak the soil.
Please be aware your schedules do not overlap.
5