Additional Fans. Connection Of Fans And Argb Lighting - Smx Smxc043 Railing Anleitung

Additional fans. Connection of fans and ARGB lighting.

Additional fans (maximum 140 mm) can be assembled on the top of the case, at the bottom and on the side panel - use the additional screws included with
your fans.
NOTE! The fan speed and backlight controller is not installed in the case. The fans are connected in parallel. Connect the fan power supply to SYS_FAN, and
connect the ARGB backlight to the port depending on the board model: D-LED, ARGB, JRAINBOW, ADDR_LED.