Kruger & Matz KM0232-SA Bedienungsanleitung Seite 9

1
3
4
6
8
11
12
14
17
EN
16
Owner's manual
2
5
7 6
9
10
13
15
16
Owner's manual
FIRST BOOTUP
After powering on the TV for the first time, the first bootup
menu will be shown.
1. Press and hold back and home screen buttons on the
remote to activate the pairing mode. After a while, the TV
will connect to the remote. Press the OK button.
2. Select language from the list and press the OK button.
3. Select the TV mode: Google TV (with network services
activated) or regular TV (without Google services).
• To configure the Google TV, download the Google Home
app on your smartphone and finish the configuration
from your smartphone.
• To configure regular TV mode, connect to your Wi-Fi or
use wired connection.
4. Read and accept the EULA.
5. Select country or region.
6. Select connected antenna type (to use DVB-T/2 antenna,
select Antenna and Digital).
7. The TV will start searching for channels. When finished,
press the Next button.
8. After finished configuration the TV is ready to use.
CONNECTING TO THE INTERNET
Wired
1. Connect the RJ-45 cable to your router or other source
of the internet.
2. Connect the cable to the Ethernet socket on the TV.
3. The TV should automatically configure settings and
connect to the internet. If there is a problem with
connection, check the Network settings on the TV and/or
check if your router is configured properly.
Wireless
Note: wireless connection is available on selected models.
Check the box that TV came in to make sure that your TV is
equipped with the Wi-Fi.
1. Press the Home button and go to Settings menu.
2. Go to the Network section
configuration.
EN
and select Network
17