Protos IN Bedienungsanleitung Seite 11

10. Avoiding damage
All manuals and user guides at all-guides.com
Avoid any contact of this Protos® Integral and its components with pointy or sharp objects
(chainsaw chain, metal tools, etc.) and with aggressive substances such as acids, oils,
solvents, fuels and the like to avoid damaging the material. Do not apply adhesive tape,
paint, solvents, adhesives or adhesive labels to the helmet – this can affect the protective
performance!
11. Service life
Protos® Integral should be used for a maximum of 5 years from the embossed date of
manufacture.
It is imperative to replace them in due time!
12. When should the Protos® Integral no longer be used?
The Protos® Integral and its components should be checked periodically for visible defects
(cracks, discoloration, etc.). The Protos® Integral and/or itscomponents should beimmedia-
telyreplaced after exposure to stress (e.g. a fall or blow), even if the damage is not visible
externally. Any modification of the product (e.g. drilling holes in the shell) can negatively
affect the protective performance and must therefore not be carried out on this product!
13. Identification
ThisProtos® Integral complies with EC-Directive 89/686/EWG
Shell material
ABS: acrylonitrile butadiene styrene, recyclable
This product was tested by:
Sicherheitstechnische Prüfstelle
der allgemeinen Unfallversicherungsanstalt
Adalbert-Stifter-Straße 65
A-1200 Wien
EU ID number 0511
The Protos® GmbH Distributor / Manufacturer (ISO 9001 certified)