Indicator Panel - Victron energy Automotive IP65 12V-4A 12V-0,8A Anleitung

1. Introduction
This charger has been designed for charging a variety of 12V
lead acid batteries, such as WET, GEL and AGM, which are
widely used for cars, motorcycles and other vehicles. Battery
capacities range from 1,2Ah to 120Ah. Full protection against
reverse polarity and short-circuiting ensures that the charging
operation is much safer. The charger will wait until a charging
mode has been selected before a connected battery can be
charged.

2. Indicator panel

LED
STANDBY
<14Ah
>14Ah
COLD
!
CHARGE
FULL
Standby, or stopped due to bad connection
Mode 1 (14,4V/0,8A) selected
Mode 2 (14,4V/4A ) selected
Mode 3 (14,7V/4A ) selected
Reverse connection detected, check polarity
Battery is being charged
Battery fully charged
STATE
3