Technical Specifications - LAMAX TECH BFit Betriebsanleitung

Alarm clock
In the app go to the Alarm settings. Set the day and time of the alarm.
At the set time the fitness band will display this icon
Inactivity alert
In the app go to the Sedentary reminder settings. Here you can set the
time range and days of the week that you want the BFit to encourage
your activity. If you are inactive for a long time within this period the
band vibrates and this icon is displayed
Phone locate
Navigate the menu of fitness band, which is paired with the phone, to
the icon . Touch and hold the display until the band vibrates. The
phone will now begin to ring or vibrate (if it is on vibrate).
Smartphone camera remote control
In the app navigate to the camera controls in the section Camera. The
icon is then displayed on the paired fitness band. To take a photo,
press and hold the BFit display.
Display incoming call and message notifications
In the app navigate to Message push settings. Select which no-
tifications to display on the fitness band. If a notification does not
appear on the Bfit screen, despite being paired with the phone and
with the notification function enabled in the app, disconnect and
reconnect the band to the smartphone via Bluetooth and turn the
notifications off and on again in the app.
Water and dust resistant
The fitness band is resistant to the ingress of water and foreign
objects according to the IP67 rating. This means that it is resistant to
water when immersed for 30 minutes up to a depth of 1m and to the
penetration of foreign matter including dust.

Technical specifications

Bluetooth
Display
Weight of body
Weight of whole
device
Body dimensions
Charging
Battery
Water resistant
v 4.0
0.91" OLED
9 g
26 g
46 mm x 18.7 mm x 7.9 mm
USB 5 V / 0.5 A
3.7V 75mAh Li-Ion
in accordance with IP67, up to 1 m for 30 minutes
4
and vibrate.
.