ARCADE1UP Midway Legacy Benutzerhandbuch Seite 10

The game screen is
frozen.
Marquee won't
light up.
The game screen looks
pixelated / blurry or
there are lines running
through the image.
One of the buttons on
the control deck is
stuck in the down
position.
You are not able to
scroll through the
games on the game
selection menu.
You can scroll through
the games on the game
selection menu, but
you can't enter a game
to begin playing.
You have entered the
game, but you can't
get the game to start.
*The game encountered a
problem when processing
the data.
*Marquee power cord is
not plugged in at the back
of the monitor.
*Marquee power cord is
plugged into the wrong
input.
*Wires/Plugs were hooked
up incorrectly.
*Pixel Smoothing may be
turned ON/OFF in the
settings menu.
*Debris may have gotten
between the button and the
button housing.
*You may be using the
wrong joystick or pressing
the incorrect buttons to
scroll through the games.
*You may be pressing the
wrong button to enter the
game.
*You may be pressing the
wrong button to start the
game.
10
*Turn the ON/OFF switch OFF and
then back ON again.
*You may need to RESET the game.
Turn the ON/OFF switch to the OFF
position. Unplug the game from the
wall outlet and wait 60 seconds to
RESET the game. Plug the game back
in and turn the ON/OFF switch back
to ON.
*Make sure all Wires/Plugs are
properly connected and all the way
set in as directed in assembly
instructions.
*Make sure all Wires/Plugs are
properly connected and all the way
set in as directed in assembly
instructions.
*Enter the settings menu to see if
Pixel Smoothing is turned ON/OFF.
*You may need to RESET the game.
Turn the ON/OFF switch to the OFF
position. Unplug the game from the
wall outlet and wait 60 seconds to
RESET the game. Plug the game back
in and turn the ON/OFF switch back
to ON.
*Take something thin (like a
business card) and place it between
the button and the button housing
and slide it back and forth to loosen
the debris.
*Look at the game control section in
the instruction manual to make sure
you are using the correct joystick or
pressing the correct buttons to scroll
through the game selection menu.
*Look at the game control section in
the instruction manual to make sure
you are pressing the correct button
to enter the game.
*Look at the game control section in
the instruction manual to make sure
you are pressing the correct button
to start the game.