Device Connections; Operation - Laserworld ES-100G Bedienungsanleitung

Manual: Evolution Series ES-100G

7. Device connections

power switch
connection for
power supply

8. Operation

1. Connect the power cable to the device and then to the mains
2. Insert key and turn it ‚ON'
3. Press „ON" to switch on your device
4. Please make sure, that the Interlock adapter is inserted
Your device runs in auto mode:
5.
6. Your device runs in music mode:
Control the music-sensitivity by the trim pot at the front side of the device. The LED is
flashing when the device is triggered.
page 7 / 24
LED signal
Interlock interface
fan
key switch
DMX address
DMX in DMX out