Snooze Function; Changing The Volume - TechniSat DIGICLOCK 3 Bedienungsanleitung

> If you have already selected the alarm mode you can now set the alarm time.
Press HOUR / TUN- (2) to set and MIN / TUN+ (3) to set the minutes.
> Press AL.1 / VOL- (8) or AL.2 / VOL+ (9) depending on whether you have
set Alarm number 1 or Alarm number 2 to save the alarm time.
2.4.7 Alarm activation and deactivation
> When the radio alarm clock is switched off, you can choose whether to
operate the device in mode during the alarm: Radio or Buzzer. The LED with
the bell symbol is the option with the buzzer. The LED with the note symbol is
the option with radio. Press AL.1 / VOL- (8) or AL.2 / VOL+ (9) to select
the desired mode.
> To cancel the alarm, press AL.1 / VOL- (8) or AL.2 / VOL+
(9) until the red indicator next to the bell and note symbol disappears.
> When the alarm is activated, in order to deactivate it, press the button
AL.OFF (2).

2.4.8 Snooze function

> During the alarm, pressing the NAP/DIMMER/SLEEP/SNOOZE button
(5) will switch off for 10 min. During the snooze period, the LED located next to the bell
and note symbol blinks.
> After 10 minutes, the alarm will sound again.
> To switch off the alarm completely, press the AL.OFF button (2), the LED
symbolising the alarm type will stop blinking.
> The alarm will sound again the next day at a set time.
2.4.9 Setting the switch-off timer
> The switch-off timer is set when the radio alarm clock is switched on.
> By pressing the NAP/DIMMER/SLEEP/SNOOZE button (5), you have the
option of changing the time after which the unit automatically switches off.
> The following settings are available: 10, 20, 30, 40, 50, 60, 70, 80, 90 min
and OFF (timer off).
> When the switch-off timer is activated, a red LED on the radio screen will
light up to indicate the timer.

2.4.10 Changing the volume

> While listening to the radio, please press AL.1 / VOL- (8) to decrease
the volume.
> While listening to the radio, please press AL.2 / VOL+ (9) to increase
the volume.
EN
9