AB PULSe 4K MINI Bedienungsanleitung Seite 12

4.1 First installation / Installation wizard
In next menu you can set up tuner A.
Here you program the settings of your
satellite system, whether you use 1,2
or more LNBs. You can do this auto-
matically or manually.
For example:
If you are using 2 LNBs (Astra 19.2°
and Hotbird 13 °), please do the
configuration opposite if your switch
between the 2 satellites is done via a
DiSEqC signal. Select your data with
the buttons ▲ / ▼ / ◀ / ▶ and
confirm your configuration with the
OK button on your remote control.
Now select with the buttons ◀/ ▶
on your remote control if you want
top load a pre-installed program list
or if you want to start a channel
search.
If you have selected "default Astra
(13-19e)...", the receiver will load a
pre-installed and sorted program list.
Confirm your selection with the button
OK on your remote.
If you select "scan new", the menu
shows as shown on the right. Using
the ◀ / ▶ buttons on your remote
control for select. (Recommended:
Yes, do an automatic scan now) and
confirm your selection with the OK
button.
11