Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Playback (Forwards)
Before beginning:
®
Is the tape correctly loaded? (See pages 6 and 7.}
®
Is the Power Cord connected?
e
ls everything correctly connected?
(See page 3.)
»
Is the TIMER START selector set to OFF?
1. Press the POWER
switch
to turn on
the power.
2. Set
the
TAPE
SELECTOR
for
the
tape being used.
3. Set the TAPE SPEED selector to the
speed
at
which
the
recording
was
made.
5.
Press the RESET
button and set the
REAL
TIME
COUNTER
to '0000'.
4. Set the MONITOR
selector to TAPE.
6. Press the Forward
( ™ ) button, the
tape
will
travel
and
playback
will
begin.
7. Adjust
the
headphone
volume
and
Output to the pre-main
amplifier (or
receiver)
with
the OUTPUT
control.
8. Tape
travel can be temporarily stop-
ped by pressing the PAUSE
( §f)
button. Press the Forward ( ™ } but-
ton to resume playback.
9. Press the Stop
( @™)
button
to re-
lease.
Werbung
