Wolf HELMET PRO Bedienungsanleitung Seite 4

should only be used with the helmets stated above.
Adjusting the Fit
1. Align earmuffs so the clips are slightly above the muff cup.
2. Pull the wire from the plastics bracket.
3. Press the helmet clip down into the safety helmet slots until the clip clicks in place.
4. Adjusts the earmuffs down over the ears.
5. To move earmuffs click the clips outward and position the earmuffs in the front or back of the
helmet when the hearing protector not in used.
Wearer Information
-
The mounted earmuffs are fitted, adjusted and maintained and maintained in accordance with
the manufacturer's instructions.
-
The mounted earmuffs are regularly inspected for serviceability.
-
Earmuffs, and in particular cushions, may deteriorate with use and should be examined at
frequent intervals for cracking and leakage.
-
The fitting of hygiene covers on the cushions may affect the acoustic performance of the
earmuffs.
-
The hearing protector provides an entertainment audio facility.
-
The earmuffs provides audio signal sound pressure level limitation and that the earmuffs limits
the entertainment audio signal to 82 dB (A) effective to the ear.
-
To prevent damage to the headset function, do not subject it to rough handling.
-
The quality of the radio receiver is influenced by the surroundings. The radio reception can
deteriorate when in motion. Televisions, fluorescent lighting or other electrical appliances can
cause interference.
-
When the volume begins to fade, recharge the lithium battery. Tailor-made lithium battery is
available from manufacturer.
-
Remove the battery from the unit to prevent battery leakage when you are not going to use it
for a long time.
-
Failure to follow these instructions or misuse of the headset can result in damage and/or loss.
-
Ear Cushions are replaceable. Check with supplier to order the Hygiene Kit.
-
The wearer should check correct operation before usage. If distortion or failure is detected,
the wearer should refer to the manufacturer's advice for maintenance and replacement of the
battery.
-
This product is durable for 2 years usage under proper operation/application unless the ear
cushions or the headset is damaged.
Replace Ear Cushions
1. Remove the O-rings
2. Put your finger between the ear cushion and the ear cup to pull them apart.
100410 WOLF Helmet PRO
4/56