Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Assembling of Portable Toilet
1. Place waste holding tank in horizontal position and make sure
that the sealed circle is in its proper position, hold fresh water
holding tank with both hands,unfold latches outward and place
the fresh water limber hole to the centre of waste holding tank's
slide valve,making sure of a good seal.
2. First lock the latches on the groove of waste holding tank and
then hitch the holding tank body, push inward to lock position.
3. Open the cap of fresh water holding tank and add fresh water
to the below of fresh water tank mouth and then tighten cap up.
Maintenance and Storage
1. Clean the tanks for long time storage.
2. Lubricate slide valve periodically with lubricants
(Vaseline suggested).
3. Relax the waste holding tank cap for long time storage.
4. Avoid strong sunlight and high temperature.
7
Werbung
