Automatic Dialling; Call On Hold (Mute); Ring Tone And Volume - Telecom Behnke 40-9525 Anleitung

Instructions for Telephone – TFT monitor - Videophone
GB GB
Operating the telephone

3.4. Automatic dialling

Via pre-select keys
▸
Pick up the receiver or press the
wait for a dial tone and press the
Via speed dialling
▸ Pick up the receiver or press the
wait for a dial tone and press the
followed by the speed dialling position you
wish to call.

3.5. Call on hold (MUTE)

When pressing and holding the MUTE-key inside
the receiver, the microphone will be switched
off. Once you let go of the MUTE-key, the micro-
phone will turn on again.
24

3.6. Ring tone and volume

The telephone offers three ring tones and three
key, different volume settings. You may choose both
key. ring tones and volume settings as follows:
▸
Pick up the receiver or press the
▸ Press the
key, ▸ Choose via the number pad (cf. image).
Please note: The telephone is pre-set to
key
combination no. 6.
Ring tone and volume
1. Ring tone A
2. Ring tone A
3. Ring tone A
4. Ring tone B
5. Ring tone B
6. Ring tone B
7. Ring tone C
8. Ring tone C
9. Ring tone C
0. Off
key
and keys
soft
regular
loud
soft
regular
loud
soft
regular
loud
Off
www.behnke-online.com