North 13.5 ROADSTER Bedienungsanleitung Seite 6

ASSEMBLING THE FRAME AND SEAT
• Remove packing and hardware bags from box and sort all the contents.
Unfold side panels of trailer to the upright position, see figure 1.
• Four grenade pins lock the sides into the upright position. Insert these
pins and lock the springs as shown in figure 3. Lift the rear cargo panel
and attach.
• There is one crossbar that supports the side panels and rear of the seat.
As you swing this crossbar upward into position across the top between
the side panels, route it through the loops at the top of the seat, see
figure 2. Insert the crossbar into the upper sleeve.
• Insert grenade pin and lock the spring clip, see figure 3.
ATTACHING FLAG
• Insert the flagpole into the flagpole pocket at the left rear
corner of the side panel.
• Make sure to always use the safety flag to maximize your
visibility to other vehicles sharing the road or path.
6