Chain Dialling - Amplicom PowerTel 58 Bedienungsanleitung

Dialling phone numbers from the phone book
There must be phone numbers stored in the phone book.
See page 66.
Your telephone can store up to 200 name and number
entries in the phone book. As you scroll to each telephone
number in the phone book in the telephone base, it will be
announced.
Open the phone book
Select an entry and dial the number
or ,
or
Quick dial
Phone numbers must have been stored as quick dial
numbers. See page 59. The stored quick dial number in the
telephone base will be announced when you press the quick
dial button.
M1, M2 or M3 Press the required quick dial button.
Dial the number
or
Service−Hotline Germany: Tel. 0180 5 001388, cost via German landline at time of going to print: 14 ct/min., different
Powertel 58 UG.indd 61 Powertel 58 UG.indd 61

Chain dialling

This feature is used for more complex telephone services,
eg for telephone banking or calling card procedures.
Several numbers stored in the phone book can be dialled
successively when a connection has already been made. It is
also possible to combine numbers from the phone book with
numbers entered manually. Numbers stored in the phone
book can be chained and transmitted as required.
or ,
Adjusting the receiver volume
The receiver volume of your PowerTel 58 telephone is louder
than with a standard telephone.
or
Boosting the receiver volume
When in a call, you can increase the loudness of each
volume setting if you press the 35dB button.
costs possible via mobile telephone systems
Telephoning
Open the phone book when a
connection has been made
Select the phone book entry and
transmit the number
When in a call, adjust the setting with
the volume buttons
Press the button, an icon fl ashes in the
display
GB
61
7/7/08 14:08:05 7/7/08 14:08:05