Basic Data; Safety - Hlc 3D Bedienungsanleitung

Basic Data

The HLC by DITABIS 3D Shakers 3D 05, 3DP 05 and 3DL 05 are three-
dimensional rocking mixers of medium capacity for mixing a maximum
volume of 5kg. This mixer has a extremely reliable and durable motor. The
shaking intensity depends on the speed. If there are any uncertainties
regarding the liquids, which should be shaked, please contact DITABIS. The
HLC by DITABIS instruments are meant for indoor usage only. The HLC by
DITABIS 3D Shaker can be integrated in an incubator and therefore is perfectly
suited for applications, where test samples must be temperated. Please use
only HLC by DITABIS accessories or accessories recommended by HLC by
DITABIS.

Safety

The instrument complies with the standards and directives mentioned in the
applicable CE declaration.
Please take note of the following safety measures:
Do only connect the instrument to an earthed mains power
socket of 115 V - 230 V, 50 – 60 Hz.
The objects to shake must be put on the tray in the most
centred position possible.
The installation surface of the instrument must be as even as
possible and may not be slippery so that the instrument can
fulfil the standard
If liquid gets into the instrument, immediately pull out the
plug and contact our service department to ensure complete
safety.
Contact with highly flammable fluids must be avoided.
The ventilation slots of the instrument may not be blocked
to ensure proper ventilation at any time.
If the mains cable is damaged, it should only be replaced by
an equal one.
IN 61010-2-051.
4