Edox 07 Bedienungsanleitung Seite 10

Intermediate or split-timing:
Start: press pusher A
Display interval: press pusher B
Making up the measured time: press
pusher B
Stop: press pusher A
Reset: press pusher B
Adjusting the chronograph hands
to zero position:
Pull out the crown to position II (all chron-
ograph hands are in the correct or
incorrect zero position).
Press pushers A and B simultaneously for
at least 2 seconds (the second counter
hand rotates by 360 degrees, the correc-
tive mode is activated).
Adjusting the second counter hand: press
pusher A
Adjusting the next hand: press pusher B
Adjusting the 1/10 second counter hand
(at 6h): press pusher A
Adjusting the next hand: press pusher B
Adjusting the minute counter (at 9h):
press pusher A
Returning the crown to position I (termina-
tion of the chronograph hands adjustment,
can be carried out at any time).
Movement 38
Chronograph: Basic functions
(start/stop/reset to zero)
Start: Press Button A
Stop: To stop the timekeeping, press But-
ton A.
Reset to zero: Press Button B.
10
Chronograph: Keeping totals with
the chronograph
Start: Press Button A - Stop: Press Button
A - Restart: Press Button A - Stop: Press
Button A
Reset to zero: Press Button B
Time keeping: Timing lap times
Start: Press Button A - Display the lap
time: Press Button B
Catching up on the time lapsed: Start:
Press Button B - Stop: Press Button A
Reset to zero: Press Button B
Adjusting the chronograph hands
to the zero position
(When one or more of the chronograph
hands are not in the correct zero position
and must be adjusted)
Pull the crown into position III
At the same time press Buttons A and B
for at least 2 seconds.
Use Button A to adjust the first hand (press
lightly for a phased adjustment, keep
pressing for a continuous adjustment).
To adjust the following hand: Press But-
ton B
Repeat the adjustments for each hand on
the chronograph.
Push the crown back to position I
Setting the time
Pull the crown into position III
Turn the crown until the correct time is
shown.
Push the crown back to position I
Quickly setting the date
Pull the crown into position II (the watch
keeps working)
Turn the crown counter clockwise until the
current date appears
Push the crown back to position I
Setting the date, the day of the
week and the time
Pull the crown into position III
Turn the crown until the day before the
correct day of the week appears.
Push the crown back to position II.
Turn the crown counter clockwise until the
date before the current date appears.
Pull the crown into position III
Turn the crown until the correct date and
day of the week appear.
Keep on turning the crown until the cor-
rect time is shown.
Push the crown back to position I
Movement 40
Watch functions:
The crown has two positions: I and II.
Pusher A at 5 o'clock, pusher B at 8
o'clock
Crow in position I: the watch is running
(position of rest)
Crown in position II: during the blocking
time from approx. 11.30pm-5.30am, no
day dates can be changed using the
pusher, as automatic changes are in pro-
gress. Pressing the pusher during the
blocking time may damage the move-
ment.
Setting sequence for: moonphase display,
day of the week, day and time:
1. Pull the crown out to position II (watch
stops)