Herunterladen Diese Seite drucken

Behringer TUBE ULTRAGAIN MIC500USB Kurzanleitung Seite 31

Vorschau ausblenden Andere Handbücher für TUBE ULTRAGAIN MIC500USB:

Werbung

60
TUBE ULTRAGAIN MIC500USB
Specifications
Input
Type
Input impedance
Maximum input level
Phantom power
Output
Type
Output impedance
Maximum output level
Controls
Gain
Output
Preamp mode control
1 x XLR (mic)
1 x ¼" TRS (line)
1 x ¼" TRS (Hi-Z)
2 channels from USB
Mic in: 3 kΩ balanced / 1.5 kΩ unbalanced
Instrument in: 800 kΩ
Mic: +1 dBu / line: +22 dBu
Hi-Z: +12 dBu with pad
+48 V switchable, mic input
1 x ¼" TRS, direct output
1 x ¼" TRS stereo, headphone output
2 channels to USB
Direct out: 480 Ω balanced, 240 Ω unbalanced
Headphone out: 24 Ω min
+22 dBu direct output
+22 dBu headphone output
Variable (+26 dB to +60 dB)
Variable (-∞ to +20 dB)
Selection of various preamp models for
microphone and instruments
Switches
20 dB Pad
+48 V
Low cut
Phase reverse
Direct monitor
Indicators
Input level LEDs
System Data
Signal-to-noise ratio
Frequency response
(headphones out, direct
monitor)
Computer Bus Connectivity
Type
Resolution / Max. Sample Rate
Quick Start Guide
Level attenuation (20 dB)
+48 V phantom power
High-pass filter (cut-off frequency 90 Hz)
Phase reverse (180°)
Headphone mono mix of Mic/Hi-Z preamp out
and Line in
-24, -18, -12, -6, 0, +6, +12, clip (dB)
90 dB, A-weighted @ -20 dBu input level
10 Hz – 71 kHz (+0/-3 dB) (mic input)
10 Hz – 71 kHz (+0/-3 dB) (Hi-Z input)
10 Hz - 65 kHz (+0/-3 dB) (line input)
USB 2.0, type B
16-bit / 48 kHz
61

Werbung

loading