Drive Inpired POZIFORM P-CH220XS Bedienungsanleitung Seite 5
Verfügbare Sprachen
Verfügbare Sprachen
alternate Solid backrest Installation with Cam buckles (Direct mounting)
The following fitting instructions are only guidelines as seating systems vary according
to manufacturer.
1.
Identify mounting location for all four cam buckles on the backrest. Drill holes or
locate T-nut positions and fasten the cam buckles with appropriate screws or bolts
(not included). See Fig 6 & 7.
2.
Thread upper straps through upper cam buckles and lower straps through lower
cam buckles (Fig. 8).
3.
Place the harness over the user's head and shoulders. With the cam buckle open,
pull the strap for a secure fit to the occupant's and close the cam buckle to lock in
position. Repeat for all four straps.
Poziform
EN - aSSEmbly INStRuCtIoNS
Figure 6
Figure 9
Figure 8
5
Figure 7
Figure 10
