Necchi NH9202 Gebrauchsanleitung Seite 12

11
1 2
Assembly
1. Insert the handle in the main support
and tighten as shown in figure. 1.
2. Insert the portable vacuum in the
rotating brush and push down as
shown in figure 2.
3. Assemble the charging station,
inserting the accessory support in the
base as shown in figure 3.
4. Position the appliance on the charging
base.
5. Charge the vacuum.
charging the battery
1. Make sure the appliance is drained
before charging.
2. Insert the power supply in the support.
3
4
3. Connect the power supply to the outlet.
4. When the appliance is charging, the
LED flashes once every 2 seconds;
when it is completely charged, the
LED is lit without flashing.
5. When the base is completely charged,
the battery control circuit shuts off
automatically, protecting it from any
damage.
6. It is normal for the power supply to
heat up during charging.
7. After each use, charge the appliance
to ensure regular operation. During
long periods of unuse, it is best to
disconnect the charging base in order
to not waste energy.
USER MANUAL
5