Installing Batteries - Cabletech Urz0346 Bedienungsanleitung

INSTALLATION
Mounting the stand
1. Place the TV with the front panel facing downwards. Make sure
to place the front panel on soft cloth, soft pads or another soft
piece of material.
2. Insert the stand into the holes located on the bottom of the TV
(L for left, R for right).
3. Insert the screws into the sockets and tighten them.
Mounting on the wall
The TV has VESA mounting holes for wall mounting bracket (not
included). Make sure that your bracket is the compatible one with
the TV. VESA standard determines the width and height of the
mounting holes for the bracket. Before mounting the TV on the wall:
• Follow all instructions from the wall mount manufacturer.
• If you have any doubts about your ability to safely install the TV
on the wall, contact a professional.
• Make sure that the wall can support the weight of the TV and the
mount.
• When installing the TV on the wall, do it with someone to help
you.
• Make sure that the TV has at least 20 cm clearance from each
side.
12
EN
BUTTONS ON THE TV
Note: the location, name and availability of the buttons may vary
according to the TV model.
• INPUT: opens the inputs menu.
• MENU: open the main menu.
• CH-: previous channel/option.
• CH+: next channel/option.
• VOL-: decrease volume.
• VOL+: increase volume.
• POWER: turn on or off the TV.
INPUT
CH+
VOL+
POWER

INSTALLING BATTERIES

1. Open the battery compartment by sliding it to the side.
2. Insert new batteries, according to the polarity.
3. Close the battery compartment.
EN
MENU
CH-
VOL-
13