ECOVACS GOAT G1 Installationsanleitung Seite 8

2
Connect the Power Interface with the Power
Supply
1. Align the notch (a) with the groove (b).
a
2. Screw the nut until they are locked into each other.
Note:
You can choose to use the Extension Cable by connecting it to Power
Interface if needed.
EN 8
b
3 Plug into the Power Outlet and Charge up GOAT
1. The Indicator Light on the Station will be solid blue if all connections
are correct. If there is something wrong with the connection, it will be
red.
Note: Keep the Power Supply at least 30 cm/12 above the ground.
Note: When Indicator Light is red, it may look pinkish if you observe the Station
from a front view under the strong sunlight.
30 cm
(12'')