ECOVACS GOAT G1 Installationsanleitung Seite 17

RECOMMENDED INSTALLATION
Before you start, please read the following instructions carefully:
1. How to Define Your Lawn Shape
• When your lawn is all connected without paths in it, please follow the
installation recommendation.
• When your lawn is divided by paths with a height lower than 3 cm,
you could take your lawn as a whole and follow the installation recom-
mendation.
• When your lawn is divided by paths with a height higher than 3cm,
please place an object with a slope equal in height to the path (e.g.uphill
mat) and take your lawn as a whole, and follow the installation
recommendation.
Note: If there is a terrace, a pet house or other obstacles within or alongside your
lawn, please check the height of the obstacles, if the height is lower than 60 cm,
you could take the area of a terrace, a pet house or other obstacles and the lawn
as a whole, check the shape of this whole area and then follow the installation
recommendation. If the height is higher than 60 cm, please contact our Customer
Service team for help.
1m
3cm
2. Lawn with Trees and Hedges
• When there are few trees and hedges on your lawn or they are mainly
scattered at the edge of the lawn with a height lower than 60 cm, see
point 5 in "3. Install the Navigation Beacon" for more information.
• When there are plenty of trees and hedges scattered over the lawn
with height higher than 60 cm, please contact Customer Service for
help.
Note:
Your GOAT is equipped with 2 Navigation Beacons. You can confirm
the number of Navigation Beacons you need and the layout by comparing our
recommendations with your own lawn. It is recommended to purchase more
Navigation Beacons to achieve a better signal coverage.
17 EN