JBM 54482 Bedienungsanleitung Seite 8

The power indicator on the control panel will
illuminate.
OPERATION
Ultrasonic cleaning
To activate ultrasonic cleaning, turn the timer
to set the cleaning duration.
The light will flash while cleaning is in progress.
Once finished, the light will remain steady.
If you select ∞, cleaning will be performed
continuously.
Heating
Turn the temperature regulator to set the tem-
perature at which you want to clean.
While the set temperature is not reached, the
light will flash.
Once the temperature is reached, the light will
remain on.
DEGAS function
This feature provides more effective cleaning.
With this function the cleaner will intermittently
stop and start the emission of ultrasound. This
will reduce the amount of air present in the li-
quid and help the machine achieve a greater
cleaning effect.
To activate the DEGAS function, briefly press
the timer button.
The DEGAS function indicator light will turn on.
To stop the DEGAS function, press the button
again.
Turning off
To turn off the machine, press the on/off bu-
tton.
Unplug the power cord.
Empty the cleaning fluid tank.
Using a cloth, wipe the tank.
· 8 ·
REF.54482