JBM 54482 Bedienungsanleitung Seite 6

EN
INSTRUCTION MANUAL
PRODUCT'S PRESENTATION
This machine allows you to clean parts by
emitting ultrasound. Through the cavitation
process, these ultrasounds create microsco-
pic bubbles in the cleaning liquid. The effect
achieved is an exhaustive and precise clea-
ning of the parts to be cleaned. Therefore, this
cleaner is especially suitable for cleaning parts
with complex shapes.
It has a basket to place the pieces, as well as a
timer and temperature regulator to adjust the
cleaning mode.
SAFETY INSTRUCTIONS
Read carefully this owner's ma-
nual before using the product.
Failure to comply with these ins-
tructions could result in personal
injury and/or damage
to the product.
Please keep the instructions for future referen-
ce.
Do not use if the tank is empty as this could
damage the ultrasonic generator.
The water level should not be less than 2/3.
Be careful when opening the lid.
It is recommended to use special water-solu-
ble detergents for ultrasonic cleaning machi-
nes.
Do not use flammable liquids such as alcohol
or gasoline, as heat and vibration could cause
a fire.
TECHNICAL SPECIFICATIONS
Ultrasonic power: 600W
Heating power: 500W
Tank capacity: 30L
Ultrasonic frequency: 40KHz
Timer: 1~60 min.
Power supply: 200~240V (50Hz)
Number of transductors: 10
Heater: 0~80ºC
Material: Stainless steel SUS304
Tank dimensions: 500x300x200mm
Dimensions: 530x325x325mm
Weight: 14.5Kg
· 6 ·
REF.54482