Beper P206ZAN111 Bedienungsanleitung Seite 8

Solar Lantern Bug Zapper Use Instructions
Any other use is to be considered as improper and thus dangerous;
this appliance is only intended for domestic use.
This device cannot be used by children, or persons with reduced
physical, sensitive or intellectual capabilities, or with lack of expe-
rience and knowledge, without supervision or if they are not given
instructions and warnings on the correct and safe use of the device
and the potential risks related to its use.
Keep the product and all packaging materials out of the reach of
children; do not let children play with the product and/or its packa-
ging. Do not use the appliance in locations where flammable vapour
or explosive dust is likely to exist.
Keep the appliance away from water. Do not immerse in water. Do
not use the appliance with wet hands/feet.
Do not attempt to damage or tamper in any way with the protective
metal grid. Do not insert any foreign object (pencils, crayons, sticks,
fingers, etc.) into the metal grid when the appliance is working.
Warning: do not touch the grid when the item is on; electric
shock hazard
Product description Fig. A
1. Solar panel
2. External plastic grid
3. Cover of the internal grid
4. Internal grid
5. Selector/Ignition button
6. Base
7. Battery compartment
First use
To ensure the battery reaches its maximum charge capacity, the bug zapper needs to be exposed to sunlight for
8 to 12 consecutive hours.
If after 8-12 hours of exposure to sunlight, the bug zapper does not turn on, check that the battery is correctly
positioned, and that the bug zapper is in a very sunny position and not in the shade.
The bug zapper can be used both as a lamp and as a bug zapper simply by moving the selector to the desired
position (Fig. A point 6). If the selector is positioned on "OFF" the bug zapper will stay off, positioned on "Light" it
will work only as a lamp, on "UV" it will work as a bug zapper.
Warning: The internal grid produces an electric discharge capable to kill insects.
Do not touch the internal grid even when the bug zapper is off in order to avoid small shocks.
Keep away from children.
Battery installing and replacement
Firmly hold the external plastic grid and turn it counter clockwise, in order to unscrew the top cover where the
solar panel is installed.
Turn the inner grid cover counter clockwise so that it can be removed.
Place the selector / ignition button in the "OFF" position.
Caution: Be careful not to touch the internal grid.
8