Jetibox; Usb; Info - Duplex DC-16 Anleitung

computer radio control system

9.5.8 JETIBOX

For maximum compatibility with 1st generation Jeti DUPLEX, the
DC/DS-16 is equipped with a Jetibox emulation function. This
emulation shows its information in the legacy two-line display
format. Use the function keys to navigate the Jetibox menu in order
to view or change the individual parameters. You can use also
wirelessly access a bound receiver's menu and/or any connected
telemetry sensors connected to the receiver.

9.5.9 USB

This menu allows you to establish communication between your
DC/DS-16 and a PC once you have connected the two with a USB
cable.
How to connect your DC/DS-16 to a PC:
1. Manually enter the menu: „Menu, >System, >USB"
2. When propted, connect your transmitter and the PC with a USB
cable.
Note: Leaving the menu disables the connection.
4.

9.5.10 Info

This menu displays information about your DC/DS-16 such as:
product name, firmware version, available memory, etc. Press the
„F5 (Ok)" button to exit this menu.
83
EN
4.