Honeywell HWV-02J01 Bedienungsanleitung Seite 4

SAFETY WARNINGS (CONTINUED)
The product will generate heat during use, please keep the area around the product clear to mitigate
heat generation.
DO NOT submerge the product in water or use the product under conditions exceeding the operating
temperature. For example, DO NOT place the lamp above the fireplace, gas, or exhaust pipe, as well as
in bathrooms, outdoors, and other places that deviate from the standard use of the product. This
product is for indoor use only.
Please store the USB cable of this product properly, do not place heavy objects on the USB cable, to
avoid trampling or damaging it. If the USB cable of the product is damaged, you can replace it by a
similar cable with fast charging function by yourself.
Avoid putting your fingers between the connecting gap between the inner and outer lamp posts when
adjusting the height, otherwise, injuries such as pinching can occur.
Consult an electrical professional when inspecting and repairing the lamp, non-professional operation
is prone to danger.
WARNING: To prevent the occurrence of accidents that threaten personal safety
such as lamp damage, falling, electrical shock, fire, and so on, please strictly follow
the instructions for installation and use, do not modify the lamp's structure, and
exchange parts or accessories.
CLEANING AND MAINTENANCE
Please clean and check the lamp regularly. Before care and maintenance, turn off the lamp and cut off
the power to prevent electric shock.
When cleaning the mirror, please use the included (or self-purchased) mirror wipes together with the
dry mirror wiping cloth. When cleaning the lamp body, wipe it with a soft, lint-free cloth with a little
diluted neutral cleaner. Do not use alcohol or any other kinds of chemical solvents, such as kerosene,
stain removal oil, etc., as they may damage the lamp's housing.
It is strictly forbidden to use water or any other liquids to directly wash any parts of the lamp.
WARNING: Before the cleaning and maintenance of the lamp, the power must be
cut off to prevent electric shock.
EN | 2