Honeywell HWV-02J01 Bedienungsanleitung Seite 3

THANK YOU
Thank you for purchasing our Honeywell PIR Makeup Mirror Light. Before using the product, please read
this user manual carefully to understand its functions and safety precautions.
PRODUCT INTRODUCTION
Honeywell PIR Makeup Mirror Light
Honeywell HWV-02J01 PIR Makeup Mirror Light adopts 128 Bridgelux Vesta® Thrive™'s full spectrum
LED lamp beads which deliver the closest natural light. With a CRI≥95, they have no blue light, glare, and
flicker. The mirror surface can be adjusted up and down through the hydraulic strut (adjustable height
0-7cm), and its angle can be adjusted within 45°, which can meet multiple height and angle
requirements. The product has multiple scene light settings to make your makeup look more natural in
specific environments.
Healthy and Safety Light Source: Through strobe and blue light hazard tests, the lamp has been
verified to meet or exceed standards to effectively protect users' eyes.
Wide Color Temperature Adjustment Range: The color temperature of the product ranges from
2700K to 6500K, which can meet the makeup light effect requirements of most scenes.
Built-in Lithium Battery with Long Endurance Time: The product is equipped with 2 built-in
high-quality 21700 batteries. With a total capacity of 9300mAh, the batteries' endurance time ranges
from 3.8h (highest brightness) to 38h (lowest brightness).
Smart Settings: The PIR entry sensor can detect your presence and turn on the light when you arrive.
Additionally, the lamp comes with a near-distance automatic brightness enhancement function for
your added convenience.
SAFETY WARNINGS
When you use the mirror lamp, basic safety precautions should always be
followed:
Do not use a power supply that exceeds the rated voltage range. Long-term use outside the rated
voltage range may damage the lamp.
Due to the fragility of the mirror, please pay attention to prevent the product from falling during use.
Please tear off the protective film of the bottom anti-slip pad before use to ensure the anti-slip
performance of the product.
Do not block the sensing area with objects (including the 5x magnifying sub-mirror) during use.
The product should be placed on a solid, flat surface (inclined to less than 6°) to avoid tipping, falling,
and damaging due to instability.
EN | 1