Maintenance work
The following maintenance work should be realised at the recommended intervals to increase the ser-
vice life of your compressor.
Draining water from the moisture trap
Note: Condensate emerging from the unit should be removed with a suitable medium (e.g.
a cloth).
Condensate water should be drained from the moisture trap daily after use (or more often if necessary).
Technical data
The following is a table of performance values of individual compressor types.
Model
Voltage
Volt
TC-2000
220-240
Push the knob in, holding it depressed until the water has drai-
ned out. After the water has been drained off loose the knob:
The knob close the moisture trap autonomous. The compres
sor should be under pressure during this procedure.
Power
Suction
capacity
Watt
litre
145
23-32
Pressure
Noise
level
bar/psi
dB (A) 1m
4.1
54-56
Weight
net
kg
4.8
ENGLISH 15