Herunterladen Diese Seite drucken

Xoro HSD 710 Benutzerhandbuch Seite 94

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

SAFETY INFORMATION
9
.
A product and cart combination should be moved with care.
force, and uneven surfaces may cause the product and cart combination to overturn.
10 Ventilation
.
Slots and openings in the cabinet are provided for ventilation and to ensure
reliable operation of the product and to protect it from overheating, and these openings must
not be blocked or covered. The openings should never be blocked by placing the product on a
bed, sofa, rug, or other similar surface. This product should not be placed in a built in
installation such as a bookcase or rack unless proper ventilation is provided or the
manufacturer's instructions have been adhered to.
11 Power Sources
.
This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power supply to your home,
consult your product dealer or local power company. For products intended to operate from
battery power, or other sources, refer to the operating instructions.
12 Grounding or Polarization
.
current line plug (a plug having one blade wider than the other). This plug will fit into the power
outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety purpose of the polarized plug. Alternate
Warnings This product is equipped with a three wire grounding type plug, a plug having a
third (grounding) pin. This plug will only fit into a grounding type power outlet. This is a safety
feature, If you are unable to insert the plug into the outlet, contact your electrician to replace
your obsolete outlet. Do not defeat the safety purpose of the grounding type plug.
13 Power Cord
.
Protection Power supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point where they exit from the product.
14 Protective Attachment Plug
.
overload protection. This is a safety feature. See Instruction Manual for replacement or
resetting of protective device. If replacement of the plug is required, be sure the service
technician has used a replacement plug specified by the manufacturer that has the same
overload protection as the original plug.
15 Outdoor Antenna Grounding
.
product, be sure the antenna or cable system is grounded so as to provide some protection
against voltage surges and built up static charges. Article 810 of the National Electrical Code,
ANSI/NFPA 70, provides information with regard to proper grounding of the mast and
supporting structure, grounding of the lead in wire to an antenna discharge unit, size or
grounding conductors, location of antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
16 Lightning
.
For added protection for this product during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet and disconnect
the antenna or cable system. This will prevent damage to the product due to lightning and
power line surges.
17 Power Lines
.
An outside antenna system should not be located in the vicinity of overhead
power lines or other electric light or power circuits, or where it can fall into such power lines or
circuits. When installing an outside antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact with them might be fatal.
18 Overloading
.
Do not overload wall outlets, extension cords, or integral convenience
receptacles as this can result in a risk of fire or electric shock.
19 Object and Liquid Entry
.
as they may touch dangerous voltage points or short out parts that could result in a fire or
electric shock.Never spill liquid of any kind on the product.
94
This product may be equipped with a polarized alternating
The product is equipped with an attachment plug having
If an outside antenna or cable system is connected to the
Never push objects of any kind into this product through openings
Quick stops, excessive

Werbung

loading

Diese Anleitung auch für:

Hsd 711