KHONS G2 EV Bedienungsanleitung Seite 7

5. Error message
The error messages will appear on the OLED when the IC-CPD failed.
Details refer to follow.
Error Message
The temperature of the device beyond
Over temper!!!
the upper temperature limits 80℃.
The leak current of the device beyond
Power leak!!!
the special limits.
Unknown board!! Original board is not used.
The cables of the device was broken, or
Unknown cable!!!
the cables can't match the device.
The hardware of the device was
Hardware error!!!
broken.
Output current of the device beyond the
Over current!!!
1.3 time rated current.
No ground!!! The device was not grounded.
Description Solution
Close power supply and
contact the manufacturer or
agents.
Close power supply and
check electric vehicle.
Close power supply and
check the distribution grid.