Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4. Warning message
When the IC-CPD work incorrectly, the corresponding parameters(i.e., ①Phase,
⑦ Transient voltage, ⑨Temperature of figure 3) in the interface of the OLED will
blink (i.e., warning message) .
Details refer to follow.
Parameters
Input voltage phase deviation exceeds 20° ,
Phase
or Power phase error.
The temperature of the device beyond 70℃
Temperature
but less than the upper temperature limit
80° C.
Input voltage of the device beyond the
upper voltage limit 265Va.c. for single-
phase systems .
Voltage
Input voltage of the device is less than the
lower voltage limit 85Va.c. for single-phase
systems
systems.
Description
or
150Va.c.
for
three-phase
Solution
Check the
wiring of
supply.
Check ambient temperature.
Close the power supply
check distribution grid.
power
and
Werbung
