Technoline WT 197 Bedienungsanleitung Seite 7

INSTALLATION
For best reception of radio controlled signal, keep your clock close to a window and away from metal
surfaces, electrical appliances and magnetic fields.
BATTERY INSTALLATION
1. Slide open the battery cover at the bottom of your unit.
2. Insert 3 x AAA batteries into the battery compartment by observing the correct + / - polarity
signs inside the battery compartment.
3. Replace the battery cover. Your clock is ready to work you.
ENVIRONMENTAL RECEPTION EFFECTS
Your radio controlled clock obtains the accurate time with wireless technology. Same as
All wireless devices, the receiving ability maybe affected by, but not limited to, the following
circumstances:
Long transmitting distance
Nearby mountains and valleys
Among tall buildings
Near railway, high voltage cable etc.
Near freeway, airport, etc
Near construction site
Inside concrete buildings
Near electrical appliances
Near computers and TV's
Inside moving vehicles
Near metallic structures
Place your clock at a location with optimal signal, i.e. close to a window and way from metal surfaces
or electrical appliances.
DCF SINGAL RECEPTION AND SIGNAL INDICATOR
After your clock is powered up, it starts to receive DCF signal. The
Weak or no DCF signal
Receiving strong DCF signal
Successful Reception
Failed Reception
Automatic reception and Manual Reception
Your clock starts automatic reception everyday at 1:00, 2:00, 3:00. If it fails to receive the DCF time
signal at 3:00, it will start reception at 4:00. If it fails again it will start reception at 5:00. If it fails again
it will start automatic reception at 1:00 again in the next day.
Manual reception: simply press WAVE button once to start manual reception. Press and hold WAVE
for 2 seconds to stop manual reception.
Remark: when your clock is receiving radio controlled time signal, all buttons except the snooze / light
button do not function.
(only icon flashing)
( icon flashing)
( icon becomes static)
( icon disappear)
P. 2
icon flashes.