Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8. Move the edge of the scraper (2) over the filled scratch to
remove any excess material (see Fig.4)
9. If you are using a combination of di erent coloured sticks,
repeat steps 5 to 8 with the darker wax stick.
10. Wipe the filled scratch with the sponge.
11. Polish the filled area in a circular motion with the supplied
cloth.
CLEANING AND CARE
WARNING RISK OF BURNS
Switch o the appliance before cleaning and let it cool
down if it has been in used less than ten minutes ago.
- Do not allow water to get inside the device.
- Use a damp cloth to clean the outside of the housing.
- Only use a dry or damp cloth to clean the device. Do not
use chemical additives.
Fig. 4:
Scraper edge
Werbung
