NAVARIS 51392 Bedienungsanleitung Seite 18

3. Remove the protective cap from the heating tool and use the
metal tip to remove loose residue (e.g. shavings) from the
scratch.
4. Switch on the heating tool (move switch to "ON") and press
and hold the power button to heat the tip of the heating tool.
WARNING RISK OF BURNS FROM HOT METAL
TIP
Never touch the metal tip of the heating tool during or
shortly after use. Allow the metal tip to cool after use befo-
re touching the tip or packing the tool away.
5. Press the hot metal tip (see Fig. 1) onto the selected wax
piece. If there are several wax pieces in your selection, start
with the brightest one selected.
Fig. 1:
Melting the wax