DJ-Tech iScratch 101 Benutzerhandbuch Seite 8

OPERATING INSTRUCTION
1. EJECT FUNCTION
Press this button to eject the disc. The disc
will not eject unless the player is in cue or
pause, this prevent accidentally ejecting the
disc when in play mode.
2. CD SLOT IN
Insert your CD in the CD Slot. Make sure that
you only hold the CD with 2 fingers on the
edge. Avoid touching the inside area of the
CD.
3. SELECTING TRACKS
Select desired track by turning the TRACK
SEARCH knob once to move to one higher or
lower track or hold the TRACK knob down to
change tracks continuously at a +10 tracks
higher speed. When a new track is selected
during playback, playback begins as soon as
the search operation is completed.
4. STARTING PLAYBACK
Press the PLAY/PAUSE button during the
pause or cue to start playback. The PLAY
indicator lights when playback starts.
5. STOPPING PLAYBACK
There are two ways to stop playback.
(1) Press the PLAY/PAUSE button during
playback to pause at that point
(2) Press the CUE button during playback to
return to the position at which playback
started (Back Cue).
6. PAUSING
Press the PLAY/PAUSE button to switch
between play and pause. The PAUSE
indicator flashes when the pause mode is set.
7. CUEING
"Cueing" is the action of preparing for
playback; when the Cue button is pressed,
playback returns to the cue point and enters
pause mode. When the PLAY/PAUSE button
is pressed during the cue mode, playback
starts.
CUE POINT SETTING:
(1) Playback starts from pause (using the jog
wheel to set the start point) or skips to a
new track during play or pause. The
beginning play point will be set to the cue
point. Or
(2) Press the IN button during playback to set
the new cue point ("CUE on the fly"). To
return to Cue point press Cue Button.
This will return to point A or B above. The
player has completed the cue or pause
operation and is waiting for the play start
command. When the PLAY/PAUSE button
is pressed, playback starts.
(3) To memory cues.
8. FRAME SEARCH
This is done by first pausing then using the
jog wheel to set the starting point. (When you
use the jog wheel the monitor function allows
you to hear what is playing.) Once you reach
your desired starting point, you can set a cue
(starting) point by pressing PLAY/PAUSE
button.
9. SCANNING (fast forward/fast reverse)
To turn the search wheel forward or reverse
will give you a fast search through a disc or
track. You will scan forward or reverse at 4
different speeds depending on how much you
turn the wheel.
10. LOOP PLAY
You can create a seamless loop between two
points continuously.
(1) Press PLAY/PAUSE button to start a CD
playing. The PLAY/PAUSE button's LED
lights.
(2) Press IN button. This sets the starting
point of the SEAMLESS LOOP. The IN
button LED will light.
(3) Press OUT button to set desired ending
point of the SEAMLESS LOOP. You will
know you are in SEAMLESS LOOP mode
because IN and OUT LED will light and
flash. RELOOP INDICATOR in LCD
DISPLAY will also flash. Sound will
continue with no interruption (SEAMLESS
LOOP).
(4) To exit SEAMLESS LOOP, press OUT
button LED will stay on but not flash.
Music will resume normal play.
7