Hisense RF632N4WIE Benutzerhandbuch Seite 39

Brief introduction Installing your new appliance
Before using the appliance for the first
time, you should be informed of the
following tips.
Warning!
For proper installation, this refrigerator
must be placed on a level surface of
hard material that is the same height as
the rest of the flooring.This surface
should be strong enough to support a
fully loaded refrigerator.
The rollers, which are not castors, should
be only used for forward or backward
movement. Moving the refrigerator
sideways may damage your floor and
the rollers.
Ventilation of appliance
In order to improve efficiency of the
cooling system and save energy, it is
necessary to maintain good ventilation
around the appliance for the
dissipation of heat. For this reason,
sufficient clear space should be
available around the refrigerator.
Suggest:
It is advisable for there to be 50-70mm of
space from the back to the wall, at least
100mm from its top, at least 100mm from
its side to the wall and a clear space in
front to allow the doors to open 130°. As
shown in follow diagrams.
C
1 0 0 m m
1 0 0 m m
m m
100
1132mm
950mm
Note:
12