Quax JOY 54 03 20 Serie Montageanleitung Seite 31

JOY
54 03 20xx
Step 5 : Use the assembled structure of step 4, the backs 9R and 9L, the joint S and thirty-four wood
screws NI
Connect both backs (9R en 9L) using the joint (S) and place the panel on the back of the chest. Check if
distance A is equal to B and then fi x the back using the wood screws (NI).
Step 6 : Use all drawer sides 12/L and 12/R, the three backs 11, the three fronts 10, twenty-four wooden
dowels A, fi fteen connectors B and twelve bolts YB
Push per back (11) two wooden dowels (A) into the drillings on the sides. Insert a back between a couple
drawer sides (12/L and 12/R). Push the bolts (YB) through the holes on the outside of the side and tighten
them in the back. Push in each side two wooden dowels (A) into the drillings on the ends. Tighten per front
(10) fi ve connectors (B) in the openings provided on the inside.
Commode met drie laden
Kommode mit drei Schubladen
Commode avec trois tiroirs
Chest of three drawers
Quax Quax
First dreams First dreams
® ®
First steps First steps
31