Modecom MC-1000HF Bedienungsanleitung Seite 3

CONTENTS
ntelligent Noise Control headphones
- 3 5mm detachable audio cable/ 1.5m
Plug adapter for flight use
- 6.3mm stereo plug adapter
AAA alkaline battery
Carrying case
BATTERY INSTALLATION
AAA alkaline battery or rechargeable battery is needed for the noise control system
Switch off the headphones, rotate the battery cover marked R counter-clockwise
you can see the battery holder.
Insert the battery into the battery holder, be sure the battery's positive and negative poles are
correctly oriented in the holder.
Rotate back the battery cover.
See picture A, B
OPERATION INSTRUCTION
Insert the battery in the correct way, and connect the audio cable, see figure A
A tactile dot is on the unit marked L for distinguishing the left side, see figure B. When you switch
on the headphones, the LED indicator will be light up indicating the Intelligent Noise Control
mode is Off when the noise control is not used)
Wear the headphone marked L on your left ear, and the one marked R on your right ear
These headphones can be used with detachable audio cables, and equipped with 6.3mm stereo
plug adapters and airline adapters for different situations
ACCESSORIES
ndicator
- Switch
- Battery
Plug adapter for flight use
- 6 3mm stereo plug adapter
3 5mm detachable audio
- Carring case
WARNINGS
- DO not use your headphones in potentially hazardous situations, such as driving and cycling
- Using your headphones
please control the volume and continuous time of your listening
- Please protect your headphones from big clash and the drive unit should be operated care-
fully
- Do not smirch the plug, or the sound may be mixed with other noises or be distorted
- Clean the headphones with soft and dry cloth, do not blow air into the cups
- Do not place heavy stuffs or pressure on the headphones, or they may be deformed in the
long term storage
- Do not place your headphones under the direct sunlight, close to the source of heat, or mois-
ture
- Ear pads are handmade parts, so the stitching and texture of each pad may be different
- Headphones may deteriorate due to long-term storage or usage
- Remove the battery if the headphones would be not used for a long period
TROUBLESHOOTING
The noise cancellation
1 Adjust the position of the headphones. (The headphones may not be placed in the right posi-
tion over the ears)
2 Switch off the headphones, and then switch on. (Environmental
nized with noise reduction system)
3 Replace the battery. (low battery)
The headphones produce some rumbling
1 Adjust the position of the headphones
tion over the ears)
The sound is distorted.
1. Turn down the source sound. (The audio equipments have too high volume)
2 Replace the battery.(low battery)
*The information is subject to changes without prior notice
cable
at high-volume and continuous listening may affect your hearing,
is not working.
noise.
(The headphones may not be placed in the right posi-
to open it, and
noise might not be synchro-