Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB/USA
Read and follow these safety precautions and instructions
carefully before use.
This product is a model building item and not a toy. For appropriate application and use,
tools like a sharp cutter, a sharp pair of scissors and special glue are necessary.
Therefore, appropriate work with this model building product does pose risk of
injury! For that reason this product is not for children!
Keep this product as well as all accessories (glue, paints, cutter etc.) out of reach
of children under 3 years of age! Let children build this kit only if supervised by a competent adult modeller.
For the use of paints and glues please follow these safety precautions carefully: Do not eat, drink or smoke. Avoid any contact
with eyes, skin or mouth. Do not breathe any vapours. Keep away from ignition sources. Follow the instructions and safety precautions
of the manufacturer carefully. First aid for contact with eyes: Flush the eye with clean water holding the eyelid open. Immediately
consult medical advice.
60131 Gras-Master
The NOCH Gras-Master has been awarded several prizes and is the perfect tool for applying static grass on a model landscape.
Thanks to the electrostatic technique the grass fibres get electrostatically charged and will land in a vertical position on the scenery.
Easy to use:
Brush the NOCH Grass Glue, item no. 61130, to the selected area that you want to grass. Fill the white container on the Gras-Master
2/3 full with the NOCH Grass. Use the fine sieve for the short NOCH Static Grass fibres or the larger sieve for the longer grass fibres
(Wild Grass, Field Grass and the Master Grass Blends). Attach the alligator clip to the landscape in the area you are going to grass.
This will polarize the device. If you are unable to attach the clip, then we recommend sticking a small nail into the surface area and
proceed to attach the clip. Switch on the Gras-Master and gently shake the device over the area covered with glue. Allow the glue to
dry and brush off or vacuum the loose grass. You may use the loose grass again. When you complete your task, always switch the
Gras-Master off.
Nozzle:
Use the included Nozzle to flock small areas e. g. you can apply long grass to even small sections. The Nozzle is also ideal for flocking
areas that are difficult to reach. Two sieves are included with the Nozzle. Use the sieve with many holes (2) for the long grass fibres
and the sieve with few holes (1) for the short grass fibres. Put the sieve on the Nozzle (number on the top) and screw the Nozzle on the
Gras-Master. Fill the container only 1/3 full when using the Nozzle.
Contents:
Alligator Clip with Cable, 1 x Small Sieve, 1 x Large Sieve, Nozzle with two Sieves, 9 Volt Alkaline Battery (pre-installed), and
1 x Bag of NOCH Static Grass "Summer Meadow" Item No. 08310.
Function:
The electrical circuit within the Gras-Master converts the 9V battery current into a stable high voltage reaching 15,000 V DC.
The coating at the bottom of the white container is a special material that creates a negative pole carried by the grass fibres. The
positive pole travels through the cable from the top of the device and releases through the alligator clip.
As the fibres exit the sieve they are pulled mid-air through an electrical field allowing the grass to land in a vertical position on the
surface area.
To achieve an effective electrical field you should use glue that conducts electricity. The NOCH Grass Glue (no. 61130) is capable of
performing this task.
Safety Instructions:
The Gras-Master is designed modern safety systems, however, follow these precautions. Keep this item away from children. Never
physically touch or place a foreign object inside the white container when the device is ON or in operation. The formation of
sparks is possible during operation. Keep away the Gras-Master from flammable liquids, gas or any combustible materials during
operations and storage. Make sure the item is stored in a dry area and protect it from humidity, moisture and wetness. Never use or
turn on the device, if you notice moisture or wetness in or on the Gras-Master.
Remove the battery if you place the Gras-Master in storage. Do not throw your used batteries with your household waste. Dispose
them according to your local environmental rules. Check your local government waste regulations, if you are not aware of the
environmental rules in your area. Electrical and electronic devices do not belong in the trash!
Cleaning Tips:
Make sure the Gras-Master is turned off and battery is removed. Never change or stress the black conductive material in the white
®
grass holder, in the Nozzle or in the two sieves 1 and 2. Do not use solvents, liquid cleaners or water to clean your Gras-Master
or its
parts! Simply use a dry towel.
Technical Data:
Input: 9V
Max. Operational Ampere: 10mA
Output: 15 kV DC
Maximum Current: 1,5mA
Power Supply: 9V Alkaline Battery
Battery Life Expectancy: max. 60 hours
In use operation indicated by illuminated red LED
On/Off Switch
Keep these instructions for reference purposes
Werbung
