Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATION
WARNING!
During operation, prevent the hose from rolling up or bending.
Use the handle (detail no. 2, chap. 1.1) on the back of the machine to move the
vacuum cleaner or the handle located on the front of the machine.
The red CLOGGED FILTER indicator light (4) indicates that the filter is clogged. If
the filter is on, first of all make sure that the hose and/or the suction accessory are
not clogged. In this case, remove the cause of the clogging. Otherwise it will be
WARNING!
Do not, under any circumstance, use the machine with a clogged filter.
necessary to clean the filter as described in the next paragraph.
4.3 Filter cleaning
The system works due to the difference in pressure between the internal
atmosphere and the external atmosphere leading to the dust becoming detached
from the filtering fabric of the cartridge, without needing to switch the vacuum
cleaner off.
The system is made up of a disk lid on the filter chamber and a shutter located on
the suction nozzle.
Proceed as follows:
•
With the vacuum cleaner on, raise the shutter (detail no.7, chap. 1.1) installed
on the suction nozzle
22
SV1-430-MBS / SV1-430-MLS
MAX-VAC.COM
OPERATION
•
Open the disk lid for a few seconds (detail no.3, chapter 1.1) and repeat the
step a couple of times. Turn on both motors to ensure the cleaning system is
more effective.
•
Lower the shutter (detail no.7, chap. 1.1) and resume normal use
WARNING!
The AirPulse cleaning system only works with the vacuum cleaner
switched on.
SV1-430-MBS / SV1-430-MLS
MAX-VAC.COM
23
Werbung
