Werbung
[Picture Adjust]
[Menu] > [Picture Adjust]
[Brightness/Contrast] (for SDR only): Adjusts the brightness and colour contrast of the screen.
•
[Gamma] (for SDR only)
•
- [Mode 1], [Mode 2], [Mode 3]: The higher the gamma value, the darker the image becomes. Likewise, the lower
the gamma value, the lighter the image becomes.
[Color Temp] (for SDR only): Set your own colour temperature.
•
- [Custom]: The user can customise the red, green and blue colour.
- [Warm]: Sets the screen colour to a reddish tone.
- [Medium]: Sets the screen colour to between a red and blue tone.
- [Cool]: Sets the screen colour to a bluish tone.
[R/G/B] (for SDR only): You can customise the picture colour using red, green, and blue colours.
•
[Six Color] (for SDR only): Meets the user requirements for colours by adjusting the saturation of the six colours (red,
•
green, blue, cyan, magenta, and yellow) and then saving the settings.
- Saturation: Adjusts the saturation of the screen colours. The lower the value, the less saturated and brighter the
colours become. The higher the value, the more saturated and darker the colours become.
[Picture Reset]: Returns picture and colour to the default settings.
•
[G-SYNC
Processor]
®
[G-SYNC Esports]: This mode is the setting specifically designed for playing competitive esports games.
•
[NVIDIA Reflex Latency Analyzer ]: Detects the time latency between triggering of the mouse and the actual
•
displayed screen and then analyzes the result on screen.
- [PC + Display Latency]: Enable the latency analyzer function. The default setting is Off.
Ensure that you have connected a mouse to the designated USB port.
- [Monitoring Sensitivity]: Adjusts the monitoring sensitivity to Low, Medium or High.
- [Show Monitoring Rectangle]: Show the monitoring gray rectangle box
- [Rectangle Preset]: Adjust preset location for the monitoring rectangle box. You can also choose Right
Handed(default), Centered or Left Handed.
- [Rectangle Location]: Manually adjust the location of the rectangle box.
- [Rectangle Size]: Manually adjust the size of the rectangle box.
[NVIDIA ULMB]: Function for less motion blur effect for fast-moving images.
•
This function is available when the refresh rate is 144 Hz or 240 Hz with DP input. Ensure that the DP cable is
directly connected to the monitor DP port.
This function may not available when connecting DP through a dongle/hub.
Make sure that the Enable G-SYNC function is not selected in the NVIDIA Control Panel.
[ULMB Pulse Width]: Adjust the panel's backlight to reduce motion blur and the level from 10 to 100 with using the
•
joystick. Smaller values decrease motion blur and brightness.
19
Werbung
