Herunterladen Diese Seite drucken

VOLTCRAFT VC-PS15000-Solar Bedienungsanleitung Seite 4

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

7 Product
13
12
11
10
9
8
Component
1
Flashlight button
2
USB-A output port
3
USB-C® charging port
4
DC charging port
5
Flashlight
6
Solar panel
7
Solar panel adjustment
feet
8
LED bulb
9
Light switch
10
Light connection socket
11
Main power switch
12
Charging indicator light
13
Remaining charge indic-
ator
4
Function/Description
Repeatedly press the button to control the flashlight
as follows:
Mode 1: Brightness
Switch on → Low brightness → High brightness →
Switch off
Mode 2: SOS
Switch on → Press and hold for 3 seconds to activate
SOS pattern →Switch off
Connect and charge a USB device via USB-A cable.
Powering
Connect and charge a USB-® device via USB-C®
cable.
Charging
Connect a USB-C® power source to charge the integ-
rated rechargeable battery.
Connect the supplied solar panels to charge the in-
tegrated rechargeable battery.
NOTICE! Connect the supplied solar panels only.
Other power sources will damage the product.
Expose the solar panel to the sun to charge the integ-
rated rechargeable battery.
Flip feet out to maximize solar panel exposure to sun-
light.
Switch on and off the LED bulb.
Connect and power LED bulbs.
Press to switch on all LED bulbs (if light switches are
in the "on" position).
Press to switch off all LED bulbs and the flashlight.
Lights up while the integrated rechargeable battery is
being charged.
Red: charging in progress
Green: fully charged
Indicates the remaining charge level of the integrated
rechargeable battery.
Flashes if the rechargeable battery is depleted and
needs recharging.
8 Disposal
This symbol must appear on any electrical and electronic equipment placed on
the EU market. This symbol indicates that this device should not be disposed of
as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
1
of it separately from unsorted municipal waste. Spent batteries and accumulators,
which are not enclosed by the WEEE, as well as lamps that can be removed from
2
the WEEE in a non-destructive manner, must be removed by end users from the
WEEE in a non-destructive manner before it is handed over to a collection point.
3
Distributors of electrical and electronic equipment are legally obliged to provide free take-
4
back of waste. Conrad provides the following return options free of charge (more details on
our website):
5
in our Conrad offices
at the Conrad collection points
at the collection points of public waste management authorities or the collection points
set up by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply
in countries outside of Germany.
9 Technical data
6
7
9.1 Main unit
Rechargeable battery ..................... Li-Ion rechargeable battery, 3,7 V, 15,000 mAh
USB-C® input................................. 5 V/DC, max. 5 A
Solar input ...................................... 2x 5 V/DC 3 W
USB-C® output............................... 5 - 12 V/DC, max. 18 W (PD 3.0)
USB-A output.................................. 2x 5 V/DC 2 A
DC output port for LED lights.......... 3x 3.7 V/DC 1 A
LED flashlight ................................. 3 modes (solid, SOS, flashing)
Protection mechanisms .................. Overcharge protection; Short circuit protection; Over
Operating temperature .................. 0 to +45 °C
Operating humidity ......................... 10 - 60 % RH
Storage temperature ...................... 0 to +45 °C
Storage humidity............................. 10 - 75 % RH
Dimensions (L x W x H) (approx.) . 162 x 162 x 70 mm
Weight (approx.) ............................ 600 g
9.2 Solar panel
Ingress protection........................... IPX4
Connector....................................... Female DC jack, 5.5 (D) x 2.1 mm (d)
Maximum power voltage (Vmp):..... 5.88 V
Open circuit voltage (Voc) .............. 6.82 V
Maximum power current (Imp)........ 0.51 A
Peak power (Pmax)........................ 3 W
Cell efficiency ................................. 16.03%
Dimensions..................................... 235 x 142 x 18 mm
Weight ............................................ 450 g
9.3 Bulb
Rated voltage ................................. 3.7 V
Rated power ................................... 3 W
Colour temperature......................... 7000 K
Brightness....................................... 200 lux
Dimensions (ø x H)......................... 50 x 7.3 mm
Cable length ................................... 280 cm
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2859535_V1_1223_jh_mh_en 27021598867372299-2 I4/O1 en
temperature protection

Werbung

loading

Diese Anleitung auch für:

2859535