Assembly Steps; Precautions For Installation - VEVOR SH-3ABE Benutzerhandbuch

ASSEMBLY STEPS

Support frame and sensor installation steps
1. Connect the upright post of the support frame (screw connection,
please do not plug it directly) ;
2. Install the cross bar fixer of the support frame;
3. install the support rail;
4. Install the fixing buckle between the support frame and the agitator
body;
5. Install the stirring rod;
Fix the support frame and the agitator main body, and connect the agitator
bar power supply according to the socket of the main body.

Precautions for installation:

1. This product is a precision experimental instrument. Please operate
according to the interface during installation.
2. Please install in strict accordance with the installation steps;
3. After installation, please check the verticality of the support frame and
the levelness of the support rail.
4. Please ensure that all parts are tightly connected without looseness;
If you find that the connection part is loose during use, please stop using it
immediately and reinstall it to avoid causing parts and experiments.
The instrument is damaged.
6