Herunterladen Diese Seite drucken

BERGNER BG-51025-BK Bedienungsanleitung Seite 10

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 20
3. Select a location where the unit is to be used, leaving enough space between back of unit and wall
to allow heat to flow without damage to cabinets and walls.
4. Plug cord into a standard electrical outlet, turn clockwise for temperature knob and the red indicator
will be on, the temperature of pan reach the setting temperature when the power light is off. The red
power light will be auto on /off cycle for setting temperature by thermostat , if temperature knob is off
position ,the plate will not heating any more . For the first use it is better to apply some oil or grease to
the plate.
5. Important: The cook plate very hot . Caution should be taken to prevent hands from coming into
contact ..
6. After use, unplug unit from the electrical outlet and allow it to cool to room temperature before
cleaning.
7. Caution: The temperature controller do not immerse in any liquid. Use with wall or base receptacle
only
CARE AND CLEANING
Cleaning
Important: Unplug and allow it to cool before cleaning. Never immerse the machine in water or any
other liquid.
1. Wipe lid, base, and cooking plates with a damp cloth and a non-abrasive soap or dishwasher
detergent. Wipe with a clean, soft, damp cloth and towel dry.
2. Storage: Store cleaned machine in a clean, dry place.
3. Important: Never store while it is still hot or still plugged in.
4. Important: Never wrap cord tightly around the appliance. Do not put any stress on cord where it
enters unit, as this could cause it to fray and break.
WARRANTY INFORMATION
The warranty only covers defects in material or workmanship.
The repairs under warranty may only be carried out by an authorized service centre. When making a
claim under the warranty, the original bill of purchase (with purchase date) must be submitted.
The warranty will not apply in cases of:
- Normal wear and tear
- Incorrect use, e.g. overloading of the appliance, use of non-approved accessories
- Use of force, damage caused by external influences
- Damage caused by non-observance of the user manual, e.g. connection to an unsuitable mains
supply or non-compliance with the installation instructions
- Partially or completely dismantled appliances
SPECIFICATION
AC220-240V 50-60Hz 2000W
7

Werbung

loading