Sharp CS-1115 Bedienungsanleitung Seite 20

OVERFLOW ERRORS —
An overflow or an error is detected through the error symbol "E" on the display in
the following cases, and.further calculations are stopped. The. . 8 or (]
key must be pushed to restart the calculation.
The contents of the memory' at the time of the error are retained:
S-1115:
1. When the integer portion of an entry number exceeds 10 digits.
This.error.can be cleared.with the €@ or [3] key.
2. When the integer portion of answer exceeds 10 digits and does not exceed 20
digits.
OVERFLOW. CALCULATION
Set Decimal @ F
Example Operation
9,876,543,210 + 7,418,529,636 9876543210 [2]
= 17,295,072,846 7418529636 [E) > 1.729507284e
(1.729507284 x 10,000,000,000 =
17,295,072,840)
9,685,743,574 + 0.65 x 3,514 9685743574 [5} 65 [x]
= 52,362,619,875,440 > 1.4901 14396
| > 1.490114396
3514 (2) > 5,236.261987
(5,236.261987 x 10,000,000,000 =
52,362,619,870,000)
3. When the square root of a negative number is caiculated.
(Vx: x<0, &34% 4)
4, When the integer portion of the quotient in the percent calculation is 21 digits.
(Ex. g0G0000000 [=] 0.000000001 [%) }
5. When any number is divided by zero. (Ex.5 [| 0 ) )
6. When the contents of the memory exceed 10 integers.
(Ex. fad 9999999999 fe} 1 ME )
CS-2115:
1, When the integer portion of an entry number exceeds 12 digits.
This error can be cleared with the fe) or [>' key.
2. When the integer portion of answer exceeds 12 digits and does not exceed 24
digits.
19