Herunterladen Diese Seite drucken

S-idee H16E Bedienungsanleitung Seite 41

1:16 rc hochgeschwindigkeitsauto

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Battery Installation and Charging
Battery installation
Please note, the battery is factory specialized battery, if using other non-official battery, the car
!
cannot start.
①Turn the battery lock knob, then flip up the cover;
②Connect the receiver plug to the battery;
③Put the battery into the battery box and make sure it is installed in place;
④Flip back the cover and turn the knob to lock.
Charge
The battery of H16 series high speed car: 7.4V 1050mAh 25C.
When charging with a 5V 2A USB adapter, the charging time is about 120 minutes.
●When the battery is charging, the green indicator light flashes;
●When the battery is fully charged, the green indicator light stays on.
*The above charging time data is base on a 5V 2A adapter. Using different adapters and power supply
equipment will affect the actual charging time. It is recommended to use a 5V 2A adapter for charging.
Adapter 5V2A
(Sold separately)
-10-

Werbung

loading

Diese Anleitung auch für:

H16h1838318384