Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The Charger is designed for indoor use only and should not come into contact with water, dust, heat or direct
EN
sunlight. To prevent overheating the product should not be covered whilst in use. Keep the device away
from vibrations and do not drop the device. Keep all flammable materials away from the Charger. Do not use
the device in an explosive environment. This Charger is designed for use with a lithium-iron phosphate
batteries and Lithium-polymer batteries. For safety reasons, this Charger must be used only for Lithium-ion
and Lithium-polymer Batteries which have 7 cells in series: Output voltage 25.2 V or 25.9 V. Do not attempt
to charge Batteries that are not expressly stated by the manufacturer to be suitable for the currents the
Charger delivers during the charge process. Do not attempt to charge faulty or damaged Batteries. The
mains socket should be easily accessible. In the event of operational error, the plug should be immediately
removed from the socket. The product contains dangerous voltages and the cover should not be removed.
All service or maintenance work should be carried out by authorised personnel or through a representative
of the manufacturer. The Charger has internal fuse which blows if a fault occurs in the Charger. Such faults
must be repaired by qualified service personnel. The Charger is double-insulated (insulation class II).
Products with plastic casing should not coming into contact with oils, grease etc., as most types of plastic
can be broken down by chemicals and solvents. The manufacturer accepts no liability or responsibility for
damages caused by incorrect operation, failure to follow the instructions for use, failure to comply with the
maintenance instructions, incorrect maintenance or any other form of incorrect handling or misuse of the
device, whether by the buyer or by third parties (e.g. incorrect operation, wrong connection, wilful damage,
etc.).
Werbung
